Protective PDA Mounts, Cases
and Accessories

• Ram Powered Cradles for iPAQs
• Ruggedized Suction Mount for iPAQ
• Armor 1900 Case Heavy-Duty PDA Protection Case
• Armor 1900 Kit with Serial 9 Pin Pod
• Armor 1900 Large Compactflash Pod

Call for 877.585.6761 for assistance in choosing
the best match of protective accessories for your Pocket PC.

Ram Powered Cradles for iPAQs

• Different models to work with iPAQ 3000, 5000, 2000 and 4000 series.
• Accomodates all GPS Receiver Packs and CF Cards, including single or double expansion packs, the factory keyboard sleeve, Transplant or Navman GPS sleeve, etc.
• User configurable, on-board male serial interface connector (12 pin and 22 pin) for data transfers. Works with either a null or non-null modem cable for the serial port, so no need to hunt and search for those hard to find adapters.
• Eliminates need to connect and reconnect peripherals to iPAQ, and reduces stress and wear on delicate iPAQ serial connector.
• iPAQ and Expansion Pack are held and locked firmly in place.
• Provides on-board regulated voltage supply (12-40 VDC In / 5.2 VDC Out) to run the iPaq device, while at the same time charging it. Greater voltage range accommodates planes, large trucks, and international vehicles.
• Easy to remove the iPAQ from the cradle.
• Patent Pending design provides features only found in RAM for stability, protection and safe data transfer without disconnections.
• 2 power cords: 10 foot coiled cord with cigarette plug on one end and a plug that fits the iPAQ cradle on the other end; 10 foot non-coiled cord with a cradle plug on one end and stripped wires on the other, to hard wire into a power source where a cigarette lighter is unavailable.
• Standard 2-hole mounting pad fits 100's of RAM-compatible components for almost unlimited choices for mounting and
  positioning the iPaq device.
• Mounting components sold separately
  

  Does not include the stand shown above.

  Call for pricing.

Rugged iPAQ Mount with Pump Suction

Rugged mount with "pump" suction cup and built in strain relief

• Holds up to bouncing and is ideal for mounting Pocket PCs on ATVs as well as on the dash of sprayers, tractors and combines.
• "Pump" suction cup stays mounted through the toughest of bouncing.
• Accommodate iPAQ expansion packs including the Navman Sleeve GPS and Transplant Compact Flash GPS and PC Card expansion packs.
• Most important feature is a "strain relief" cable mount that is designed to hold GPS cables tightly in place on the bottom of the iPAQ (stopping the movement of the plug that causes breakage).
• Works with iPAQ 3100, 3600, 3700, 3800, 3900 and 5000 models.

Armor 1900 Case:
Heavy-Duty, Ruggedized PDA Protection

The ultimate protective case for your PDA. Water-proof, crush-proof, drop-proof design that economically ruggedizes your PDA and protects your valuable data.

• Fits most popular PDAs
• Makes your PDA waterproof, dustproof, crush-proof, drop-proof
• Easily use PDA through protective casing
• Portals for connecting printer, external GPS, chargers, etc
• Many accessories for protecting GPS cards, RFID readers, etc
• Secure stylus holder on outside
• Smaller and easier to hold in one hand than previous Armor models
• Unconditional Lifetime Guarantee

  $89  

Armor 1900 with Serial 9 Pin Pod

• Armor 1900 case
• Serial 9 Pin Power Pod. This pod provides a standard 9 pin serial port that works with most GPS receivers with a serial cable.
• Power input port that works with most iPAQ Auto Adapters.
• Works with iPAQ models 3800, 3900, 5400, 5500, and 2200 series.

$139  

Armor 1900 Large Compactflash (CF) Pod

Allows for the use of larger CF devices that may not fit within the Armor 1900 case. Protects your devices from the environment and impact while providing full environmental and impact protection. The POD has a hardened, ADC, scratch-resistant lens for the devices to operate through.

Related Products

iPAQ Pocket PC
Transplant CF GPS Receiver
Accessories

back to top