GPS and iPAQ Accessories

• RAM Powered Cradles for iPAQs
• RAM Vehicle Mounts for Laptop Computers and Accessories
• iFB2 Box for Boom Sense Lines w/Site Mate
• iPAQ to GPS Serial Cable
• Belt Clip Holster
• Clamp-on Mount
• 4-1/2" Mounting Cup with Stud
• 6" Mounting Cup with Stud
• Rugged Suction Mount
• Auto Power Adapter
• Auto-Sync Cable - Universal
• CompactFlash Card Adapter

Also see our pages with Protective Cases and Accessories and RAM Mounts.

Don't see what you need? Call us toll-free at 877.585.6761.

RAM Powered Cradles for iPAQs

These powered cradles provide power for charging and running your iPAQ (including 2200 and 4400 series) and any expansion pack. Accomodates all single or double expansion packs, GPS Receivers and CF Cards, and the factory keyboard sleeve. Provides stability, protection and safe data transfer without disconnections. See details on our Protective, Cases, Mounts and Accessories page.

RAM Vehicle Mounts for Laptop Computers and Accessories

Securely mount your laptop computer in your vehicle for easy access and enhanced stability. See details on our RAM Mounts page.

Interface Box

The Interface box allows users to connect to boom sense lines so Site Mate will only log data when the booms are turned on.

• Works with any GPS receiver that has a serial port output cable and outputs NMEA0183 data.
• When used with a Raven GPS receiver or the power adapter connector, the IFB2 box will reduce a 12 volt input to a 5 volt trickle charge to the iPAQ. This helps the iPAQ to "maintain" power during its use. It is still recommended that users completely charge the iPAQ's battery every 3 days or so.
• Allows GuideMate to communicate to an external Raven lightbar through the IFB2 box.
• Retail $175.

  Call for product pricing or to order.

iPAQ to GPS Serial Cable

This cable allows you to connect your iPAQ to your GPS unit.

• The iPAQ GPS cable has a connector on one end that plugs into the bottom of iPAQ models 3800 and higher (3800, 3900 and 5400 series). The plug includes a power jack that will work with standard iPAQ AC adapters. The other end of the cable is a male, serial port. This is designed to plug into a GPS "PC Cable" that has a female serial plug that is available with virtually all GPS receivers.
• Retail $75.

  Call for product pricing or to order.

Belt Clip Holster

Fits any iPAQ expansion pack and Navman GPS receiver.

iPAQ Mount - Clamp-on type

Strong and durable mount for your PDA. Adjustable viewing angle, easy dismount/remount, vibration free design. Clambps to a 3/4" or 1" round or square post.

4-1/2" Mounting Cup with Stud

Durable polycarbonate accessory mount with threaded stud for attaching equipment. 4.5 inch vacuum pad attaches to flat or curved, smooth, nonporous surfaces. Red-line indicator warns user of any vacuum loss. Check valve allows repumping without loss of remaining vacuum. Lift tabs on pad edges permit instant release. 40 lb capacity.

Replacement Suction Cup

6" Mounting Cup with Stud

Durable polycarbonate accessory mount with threaded stud for attaching equipment. 6 inch vacuum pad attaches to flat or curved, smooth, nonporous surfaces. Red-line indicator warns user of any vacuum loss. Check valve allows repumping without loss of remaining vacuum. Lift tabs on pad edges permit instant release. 60 lb capacity.

Heavy Duty Universal Auto Power Adapter

Heavy duty, universal auto power adapter for iPAQ Pocket PC. Plugs into cigarette lighter. Factory refurbished. Call for new models at $35.

Auto-Sync Cable - Universal

For iPAQ 3800 & 3900. Connect iPAQ to PC using USB or 9-pin serial ports.

CompactFlash Card Adapter

Adapter to enable use of Type I/II CompactFlash cards in any computer with a PCMCIA slot.

back to top